Goggles Care Guide

 

GOGGLE CARE

To obtain maximum benefit, keep lenses clean and free from dirt and grease. Rinse in clean cold water after every use. Do not wipe or rub the inside lens of the goggle. A selection of Speedo premium goggles come with a keep-case included. See Vue, Vue Mirror and Futura Biofuse Flexiseal Goggles.

 

FITTING YOUR GOGGLES

Position the goggles on face and stretch head strap over back of the head to rest at a 45-degree angle on the crown of the head. Continue to make adjustments until leaking stops. To clear water or to adjust goggles, tilt slightly away from face. Some Speedo goggles come with strap markings to indicate and measure the correct fit, for ease in adjustment swim after swim. See Fastskin Pure Focus Goggles.

 

REMOVING YOUR GOGGLES

To remove goggles safely, put thumbs under head strap at side of head. Slide thumbs back of head and lift elastic from back to front of head.

 

ADJUSTING THE NOSE PIECE

For a comfortable watertight seal with a notched nose bridge goggle, adjust 1 notch at a time, together or further apart. When happy with the fit you may remove excess nose piece. For other goggle types, adjustment is either not necessary or a selection of nose bridges will be supplied to gain correct fit. For an interchangeable nose bridge see Opal and Opal Mirror Goggles or Aquapure Goggles.

 

SAFETY WARNING

Always take care when removing swim goggles. Never pull eye cups away from face as they may spring back and cause eye injury.  Discontinue use immediately if irritation arises.